HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 499

perfcleareemonitor Operands This command has the following operands: slotnumber (V4.1.x only) portnumber monitorId Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Specify the monitor number you want to clear. Monitor numbers are defined when you create the monitor on a port. This operand is optional. If not specified, all monitors's counters on the port will be cleared. Example To clear statistics counters for an End-to-End monitor: switch:admin> perfcleareemonitor 2, 5 End-to-End monitor number 5 counters are cleared switch:admin> switch:admin> perfcleareemonitor 2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y switch:admin> See Also perfshoweemonitor perfaddeemonitor Fabric OS Version 3.1.x/4.1.x Reference Guide 499