HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 605

portShow Operands Table 15: PortShow Display Fields (Continued) Field Parity_err 2ndary_parity_err CMI_bus_err Description Real Tx data parity error. Secondary Tx data parity error. These are not real Tx data parity errors but rather forced by the ASIC due to certain central memory errors so that the transmitter will abort the frame. This field will only be displayed when there are errors. Control message interface errors. The second column shows Link Error Status Block counters. The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column also shows the number of LIPs received, number of LIPs transmitted, and the last LIP received. This command has the following operands: slotnumber (V4.1.x only) portnumber Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Fabric OS Version 3.1.x/4.1.x Reference Guide 605