HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 895

zoneRemove zoneRemove Remove a member from a zone. Synopsis zoneRemove "zoneName", "member;member" Availability Admin Release V3.1.x and V4.1.x Description Use this command to remove one or more members from an existing zone. The member list is located by an exact string match; therefore, it is important to maintain the order when removing multiple members. For example, if a zone contains "array2; array3; array4," removing "array3; array4" succeeds. but removing "array4; array3" fails. If all members are removed, the zone is deleted. This command changes the Defined Configuration. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgsave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgenable command. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 895