HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 781

spinSilk -verbose mode (V4.1.x only) -ports itemlist (V4.1.x only) For lb_Mode == 2,3 the following speed modes are available to test fifo underrun. 3,5: set all even ports' speed for 2 Gbit/sec, set all odd ports' speed for 1 Gbit/sec. 4,6: set all even ports' speed for 1 Gbit/sec, set all odd ports' speed for 2 Gbit/sec. Specify a non-zero value, to display more detailed information during the test. This mode should be used for debugging purpose. This operand is optional. Specify a list of user ports to test. By default all of the user ports in the current switch are tested. This option may be used to restrict testing to the specified ports. Example To run spinsilk on a switch: switch:admin> spinsilk 2 Running Spin Silk One moment please ... switchName: switch switchType: 2.2 switchState: Testing switchRole: Disabled switchDomain: 1 (unconfirmed) switchId: fffc01 switchWwn: 10:00:00:60:69:00:73:71 port 0: cu Testing Loopback->15 port 1: sw Testing Loopback->11 port 2: sw Testing Loopback->6 port 3: lw Testing Loopback->4 . . . Transmitting ... done. Spinning ... port 0 Rx/Tx 1 of 1 million frames. port 1 Rx/Tx 1 of 1 million frames. port 2 Rx/Tx 1 of 1 million frames. port 3 Rx/Tx 1 of 1 million frames. . . . Fabric OS Version 3.1.x/4.1.x Reference Guide 781