HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 790

Fabric OS Commands Note: There is a LINK table that stores 16 pairs of SID-DID address. Each of the SID-DID pairs is named a LINK. This table is used for gathering statistics that match the LINK. Operands This command has the following operands: passcount (V3.1.x only) -passcnt count (V4.1.x only) -ports itemlist (V4.1.x only) Specify the number of times to perform this test. The default value is 1. This operand is optional. Specify a list of user ports to run the test. If omitted, all the user ports in the switch will be assumed. See itemlist for more information about selecting ports. This operand is optional. Example To run a statistics counter test on a switch (V3.1.x example): switch:admin> statsTest Running Statistics Cnt Test ... passed. switch:admin> To run a statistics counter test on a switch (V4.1.x example): switch:admin> statstest -passcnt 1 -ports 1/0-15 Running Statistics Counter Test ....... passed. switch:admin> Errors: V4.1.x When it detects failure(s), the subtest may report one or more of the following error messages: DIAG-STSINIT DIAG-STSNULL DIAG-STSSID DIAG-STSXMIT DIAG-STSRCV DIAG-STSFRMCNT 790 Fabric OS Version 3.1.x/4.1.x Reference Guide