HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 657

qloopShow qloopShow Displays QuickLoop information. Synopsis qloopShow [pattern][, mode] Availability All users. Release V3.1.x and V4.1.x Description Use this command to display QuickLoop configuration information. If no parameters are specified, all zone configuration information (defined and enabled) is displayed. See cfgShow for a description of this display. If a parameter is specified, it is used as a pattern to match QuickLoop names; those that match in the defined configuration are displayed. This command changes the Defined Configuration. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 657