HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 85

camTest domain and area fields of the SID zeroed. If a miss is expected (when the walking 1 or walking 0 pattern is used) the original SID in the frame transmitted is received unchanged. Note: This command may not be executed on an enabled switch. You must first disable the switch using the switchDisable command. Operands This command has the following operand: passcnt (V3.1.x only) --slot number (V4.1.x only) -passcnt count (V4.1.x only) -txport itemlist (V4.1.x only) Specify the number of times to perform this test. The default value is 1. Specify the slot number that the diagnostic will operate on. The ports specified will be relative to this slot number. The default is set to 0 and is designed to operate on fixed port count products. Specify the number of times to perform this test. The default value is 1. Specify a list of blade ports to test. By default, all the blade ports in the specified slot (--slot) will be used. See the itemlist help pages for further details. Example To verify that Content Addressable Memory (CAM) is functioning correctly in V3.1.x: switch:admin> camtest Running CAM Test passed. To verify that CAM is functioning correctly in V4.1.x: switch:admin> camtest -txports 1/1 Running CAM Test Test Complete: "camtest" Pass 1 of 1 Duration 0 hr, 0 min & 5 sec (0:0:5:14). passed. Fabric OS Version 3.1.x/4.1.x Reference Guide 85