HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 785

sramRetentionTest Operands For details about the patterns used in diagnostic tests, see the datatypeshow command. This command has the following operand: passCount (V3.1.x only) --slot number (V4.1.x only) -passcnt count (V4.1.x only) -ports itemlist (V4.1.x only) -skip bitmask (V4.1.x only) -delay value (V4.1.x only) Specify the number of times to execute the test. The default value is 1. This operand is optional. Specify the slot number that the diagnostic will operate on. The ports specified will be relative to this slot number. The default is set to 0 and designed to operate on fixed port count products. Specify the number of times to execute this test. The default value is 1. to stop Specify a list of blade ports to test. By default all the blade ports in the specified slot will be used. See itemlist for more details. Specify a patterns to skip in the test. This command will use the data patterns described above by default. Using this option, the user can intentionally skip one or more pattern(s) if needed. Specify the delay between the read and write in seconds. The default value is 10, which is 10 seconds. Example To run a data retention test: switch:admin> sramRetentionTest Running SRAM Retention Test ... passed. Errors Below are the possible error messages if failures are detected: ■ For V3.1.x: DIAG-REGERR DIAG-REGERR_UNRST DIAG-BUS_TIMEOUT Fabric OS Version 3.1.x/4.1.x Reference Guide 785