HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 906

Fabric OS Commands for Licensed Products Advanced Performance Monitoring Commands The following commands are available with the purchase of an Advanced Performance Monitoring license key. For more detailed information about Performance Monitoring refer to the HP StorageWorks Advanced Performance Monitoring Version 3.1.x/4.1.x User Guide. Table 23: Performance Monitoring Commands Command perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWriteMonitor perfCfgClear perfCfgRestore perfCfgSave perfcleareemonitor perfclearfiltermonitor perfClrAlpaCrc perfDelEEMonitor perfDelFilterMonitor perfSetPortEEMask perfShowAlpaCrc Description Add an end-to-end monitor to a port. Add an IP monitor to a port. Add a SCSI Read monitor to a port. Add a SCSI Read and Write monitor to a port. Add a SCSI traffic frame monitor to a port. Add a user-defined monitor to a port. Add a SCSI Write monitor to a port. Clear the performance monitoring settings from flash memory. Restore performance monitoring settings from flash memory. Save the current performance monitoring settings to flash memory. Clear statistics counters of an end- to-end monitor on a port. Clear statistics counters of a filter-based monitor. Clear an AL_PA device CRC count by the port and AL_PA. Delete an end-to-end monitor on port. Delete a filter-based monitor. Set overall mask for end-to-end (EE) monitors. Display the AL_PA CRC count by port or by AL_PA. 906 Fabric OS Version 3.1.x/4.1.x Reference Guide