HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 509

perfHelp Example To display commands related to performance monitoring: switch:admin> perfHelp perfCfgSave perfCfgRestore perfCfgClear perfClrAlpaCrc perfShowAlpaCrc perfAddEEMonitor perfDelEEMonitor perfClearEEMonitor perfShowEEMonitor perfSetPortEEMask perfShowPortEEMask perfAddUserMonitor perfAddReadMonitor perfAddWriteMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddIPMonitor perfDelFilterMonitor perfClearFilterMonitor perfShowFilterMonitor Save Performance configuration Restore Performance configuration Clear Performance settings from flash Clear ALPA device's CRC count Get ALPA CRC count by port and ALPA Add end-to-end monitor to a port Delete an end-to-end monitor on port Clear an end-to-end monitor's counters on port Show user-defined end-to-end monitors Set overall mask for E-to-E monitors Show the current end-to-end mask Add filter-based monitor Add filter-based monitor - SCSI Read Add filter-based monitor - SCSI Write Add monitor - SCSI Read and Write Add monitor for SCSI frame count Add monitor for IP traffic frame count Delete filter-based monitor Clear filter-based monitor's counters on port Show filter-based monitors NOTE: Don't run help command after firmwaredownload without reboot. It will give you wrong information. switch:admin> See Also None. Fabric OS Version 3.1.x/4.1.x Reference Guide 509