HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 789

statsTest statsTest Run a statistics counter diagnostic test. Synopsis V3.1.x statsTest [passcount] Synopsis V4.1.x statsTest [-passcnt count][-ports itemlist] Availability Admin Release V3.1.x and V4.1.x Description Use this command to verify the ASIC statistics counter logic. It can run on every base port of quadrant, and send the frame through internal loopback with no CRC data to induce the CRC error. This command is also called from camtest. This test covers the following statistics counter functionality. 1. The number of received frames with the CRC error that matched the SID-DID pair specified in the LINK table. There are a total 16 of these statistics counters (0-15), respectively. 2. The number of received words in frames that matched the SID-DID pair specified in the LINK table. There are a total 16 of these statistics counters (0-15), respectively. 3. The number of transmitted words in frames that matched the SID-DID pair specified in the LINK table. There are a total of 16 of these statistics counters (0-15), respectively. 4. The number of frames with the CRC error that matched the corresponding ALI (0-127), respectively. This command may not be executed on an operational switch. You must first disable the switch using the switchDisable command. Fabric OS Version 3.1.x/4.1.x Reference Guide 789