HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 276

Fabric OS Commands fazoneRemove Remove members from a Fabric Assist mode zone. Synopsis fazoneRemove "fazoneName","member;member" Availability Admin Release V3.1.x and V4.1.x Description This command removes one or more members from an existing Fabric Assist zone. Each deleted member must be found by an exact string match. Order is important when removing multiple members of a Fabric Assist zone. For example, if a Fabric Assist zone contains "array2; array3; array4" then removing "array4; array3" fails, but removing "array3; array4" succeeds. If issuing this command results in all members being removed, the Fabric Assist zone is deleted. Note: This command does not change the defined configuration (which you can view using the cfgShow command) until the cfgSave command is issued. For the change to become effective, an appropriate Fabric Assist zone configuration must be enabled using the cfgEnable command. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgSave command. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. 276 Fabric OS Version 3.1.x/4.1.x Reference Guide