HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 580

Fabric OS Commands Operands There is further information about the login after the above columns. This can include the DID (Destination Identifier) that the port is logged on to. This command has the following operands: slotnumber (V4.1.x only) portnumber Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is optional. Example The following example shows an N_Port with one FLOGI and two PLOGIs: switch:admin> portloginshow 2 Type PID World Wide Name credit df_sz cos fe 201700 21:00:00:e0:8b:05:a3:c9 3 2048 8 scr=1 ff 201700 21:00:00:e0:8b:05:a3:c9 0 0 8 d_id=FFFC20 ff 201700 21:00:00:e0:8b:05:a3:c9 0 0 8 d_id=FFFFFC See Also portshow fcpprobeshow 580 Fabric OS Version 3.1.x/4.1.x Reference Guide