HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 158

Fabric OS Commands rusersd telnetd (V4.1.x only) rapid thad Disable RLS probing Dynamically enables or disables a server that returns information about the user logged into the system through remote procedure calls (RPC). The information returned includes user login name, the system name, login protocol or type, login time, idle time, and remote login location (if applicable). The retrieval of this information is supported by a number of operating systems which support RPC. On most UNIX-based systems (HP-UX, Irix, Linux, Solaris, etc.) the command to retrieve the information is rusers. See your local system documentation for the appropriate usage of this or equivalent command. Used to enable or disable the telnet interface to a switch. If you are using SSH to manage a switch you can disable the telnet interface for greater security. The default value is on (telnet is enabled). Dynamically enables or disables a service that handles RPC requests for the API server. The default value is on. Dynamically enables or disables the threshold monitor. The default value is on. This disables Read Link Error Status probing of the AL_PAs. The default value is on, that is Disable RLS probing is disabled. Portlog Events Enable Use these parameters to specify which events create an entry in the port log. The Portlog Events fields are as follows: Table 6: Configure Command Portlog Events Parameters Field start: a switch start or re-start event disable: a port is disabled enable: a port is enabled ioctl: a port I/O control is executed Tx: a frame is transmitted Tx1: a frame is transmitted, class 1 Tx2: a frame is transmitted, class 2 Tx3: a frame is transmitted, class 3 Default On On On On On On On On Range On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off 158 Fabric OS Version 3.1.x/4.1.x Reference Guide