HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 382

Fabric OS Commands Fibre Channel Subnetmask Gateway Address Set the Fibre Channel subnetmask of the switch. Set the gateway IP address for the switch. Parameters: V4.1.x For a StorageWorks Core switch, you must set values for both logical switches and both CP cards. Use the option operand to select the logical switch or CP where you want to configure an IP address. The option operand is only available for the StorageWorks Core switch. If the option operand is not specified for a StorageWorks Core switch, the command becomes interactive. Each Logical switch has: ■ Ethernet IP Address ■ Ethernet Subnetmask ■ Fibre Channel IP Address ■ Fibre Channel Subnetmask Each CP has: ■ Ethernet IP Address ■ Ethernet Subnetmask ■ Host Name ■ Gateway IP Address The default values for hostname, ipaddress, subnet address (for CP only), mask (for switch only), and gateway address (for CPs only) are: ■ sw0 = hostname SW12000_1, ip 10.77.77.77, mask 255.0.0.0 ■ sw1 = hostname SW12000_2, ip 10.77.77.76, mask 255.0.0.0 ■ cp0 = hostname cp0, ip 10.77.77.75, subnet 255.0.0.0, gateway 0.0.0.0 ■ cp1 = hostname cp1, ip 10.77.77.74, subnet 255.0.0.0, gateway 0.0.0.0 Entering Values and Saving Changes After each prompt the current value is shown. You may: ■ Press Enter to retain the current value ■ Enter an IP address in conventional dot notation ■ Enter none 382 Fabric OS Version 3.1.x/4.1.x Reference Guide