HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 366

Fabric OS Commands To force 10 Mbps Half Duplex, follow this scenario for the ifmodeset command: switch:admin> ifModeSet eth0 Exercise care when using this command. Forcing the link to an operating mode not supported by the network equipment to which it is attached may result in an inability to communicate with the system through its ethernet interface. It is recommended that you only use this command from the serial console port. Are you sure you really want to do this? (yes, y, no, n): [no] y Proceed with caution. Auto-negotiate (yes, y, no, n): [no] n Force 100 Mbps / Full Duplex (yes, y, no, n): [no] Force 100 Mbps / Half Duplex (yes, y, no, n): [no] Force 10 Mbps / Full Duplex (yes, y, no, n): [no] Force 10 Mbps / Half Duplex (yes, y, no, n): [no] y Committing configuration...done. switch:admin> See Also ifModeShow ifShow 366 Fabric OS Version 3.1.x/4.1.x Reference Guide