HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 651

qloopCreate qloopCreate Create a QuickLoop. Synopsis qloopCreate "qloopname", "member;member" Availability Admin Release V3.1.x and V4.1.x Description Use this command to create a QuickLoop. A QuickLoop name must begin with a letter and be followed by any number of letters, digits, and underscore characters. Names are case sensitive, for example, "Qloop_1" indicates a different QuickLoop than "qloop_1". Blank spaces are ignored. The QuickLoop member list must have one or two members; an empty list is not allowed. When a configuration is enabled, all QuickLoops defined in the configuration must resolve to a maximum of two switch World Wide Names. Zone alias names entered as members of this QuickLoop must be defined with WWNs. Zone alias names that are defined by domain and port number, or AL_PA are not accepted as members of the QuickLoop. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 651