HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 296

Fabric OS Commands -n (V4.1.x only) -i (V4.1.x only) Specify this operand to de-activate auto-commit mode. By default, after running this command and after reboot, the switch will perform a firmwareCommit command automatically. When this mode is disabled, the user needs to issue the firmwareCommit command manually to replicate the downloaded image from the primary partition to the secondary partition of a CP. Specify this operand to enable Incremental Install Mode. By default, firmwareDownload will do a full install of the whole firmware regardless of what the original firmware version was on the system. In Incremental Install Upgrade Mode the names of packages in pfile are compared to what already installed on the switch and only the packages which are different from those already stored or not on the switch yet are installed. If no operand is specified the operation becomes interactive and you are prompted for input. Example To download the firmware to a V3.1.x switch: Switch:admin> firmwaredownload Server Name or IP Address [jsmith-sun]: fjones-sun User Name [jsmith]: fjones File Name [~jsmith/V3.1]: ~fjones/V3.1 Protocol (RSHD or FTP) [rshd]: 3869708+301460+1119124, csum 6edc writing flash 0 writing flash 1 download complete Switch:admin> 296 Fabric OS Version 3.1.x/4.1.x Reference Guide