HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 804

Fabric OS Commands switchcfgpersistentenable Enable a switch persistently. Synopsis switchcfgpersistentenable Availability Admin Release V3.1.x and V4.1.x Description Use this command to persistently enable the switch. The persistently enabled switch remains enabled across power cycles and switch reboots. By default a switch is enabled persistently. When this command is executed, it will be effective immediately by enabling the switch, if it is not already enabled. The persistent switch disable configuration overrides all other switch configurations but it does not alter any of them. The persistent switch enable will also re-enable all previously set switch configurations. A persistently enabled switch can temporarily be disabled by switchdisable command until next switch enable, power cycle or switch reboot. The persistent switch disable or enable configuration does not alter the persistent disable or enable configurations of the ports within the switch. Operands None. 804 Fabric OS Version 3.1.x/4.1.x Reference Guide