HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 475

perfAddEEMonitor perfAddEEMonitor Add end-to-end monitor to a port. Synopsis: V3.1.x perfAddEEMonitor portnumber, "SourceID", "DestID" Synopsis: V4.1.x perfAddEEMonitor [slotnumber/]portnumber, "SourceID", "DestID" Availability Admin Release V3.1.x and V4.1.x Description Use this command to add an end-to-end performance monitor to a port. The monitor counts the number of words received, number of words transmitted and number of CRC errors detected with frames qualified using either of following two conditions: ■ For frames received at the port (with end-to-end monitor installed) the frame SID is the same as "SourceID" and frame DID is the same as "DestID." Both RX_COUNT and CRC_COUNT will be updated accordingly and are associated with frames received at port. ■ For frames transmitted from the port (with end-to-end monitor installed) the frame DID is the same as "SourceID" and frame SID is the same as "DestID," TX_COUNT will be updated accordingly and are associated with frames received at port. Depending on the application, any port along the routing path can be selected for such monitoring. For example, to monitor traffic flowing from point A, receiving at port C and transmitting at port D to reach point B, and the traffic flowing back from B to A. You can install a monitor on port C, specify point A as "SourceID" and point B as Fabric OS Version 3.1.x/4.1.x Reference Guide 475