HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 374

Fabric OS Commands Operands This command has the following operands: slotnumber (V4.1.x only) portnumber Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4 or 7 through 10) and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is optional. When no slot number and port number are specified, this command displays the interface information for all ports on the switch (including non E_Ports). Examples To display FSPF interface information: switch:admin> interfaceShow 4/0 idbP = 0x10f61f40 Interface 4 data structure: nghbP = 0x10f61d90 ifNo = 4 cost = 1000 delay = 1 lastScn = 5 lastScnTime = Mar 29 12:57:52.833 upCount = 2 lastUpTime = Mar 29 12:57:52.833 downCount = 1 lastDownTime = Mar 29 12:57:47.566 downReason = 2 iState = UP Type to continue, Q to stop: < sample output truncated > 374 Fabric OS Version 3.1.x/4.1.x Reference Guide