HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 871

txdpathtest Operands 6. Repeat steps 2 through 5 for all ports present until: a. The number of frames (or passcount) requested is reached, b. All ports are marked bad. At each pass, a different data type is used to create the frame from a palette of 7; meaning if a pass of 7 is requested, 7 different frames are used in the test. If 8 passes, the first 7 frames are unique, and the 8th is the same as the first. The data palette of 7 are: 1) CSPAT: 0x7e, 0x7e, 0x7e, 0x7e,... 2) BYTE_LFSR: 0x69, 0x01, 0x02, 0x05,... 3) CHALF_SQ: 0x4a, 0x4a, 0x4a, 0x4a,... 4) QUAD_NOT: 0x00, 0xff, 0x00, 0xff,... 5) CQTR_SQ: 0x78, 0x78, 0x78, 0x78,... 6) CRPAT: 0xbc, 0xbc, 0x23, 0x47,... 7) RANDOM: 0x25, 0x7f, 0x6e, 0x9a,... Since this test requires that two ports can send and receive frames it is strongly suggested that you run portloopbacktest before attempting to run this test. This command has the following operands: passcount speedmode Specify the number of times to perform this test. The default value is 0xfffffffe. This operand is optional. Specify the speed mode for the test. Valid values are 0, 1, or 2. This parameter is only used for 2-Gbps based products where it controls the speed at which each port is operated. For 1-Gbps only products it is ignored. 0 Run test at both 1-Gbps and 2-Gps (default). 1 Set all ports speed to lock at 1-Gbps. 2 Set all ports speed to lock at 2-Gbps. Example To run a functional test of TXA and TXD connections: switch:admin> txdpathtest Running Tx Data Path Test ..... passed. Fabric OS Version 3.1.x/4.1.x Reference Guide 871