HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 692

Fabric OS Commands The administrator is prompted to enter passwords for the following accounts: ■ Factory ■ Root ■ Admin ■ User If the fabric is not in secure mode and one or more specified FCS switches are present in the fabric, the command must be issued on the first active FCS in the list. If the fabric is not in secure mode and no specified FCS switches are present in the fabric, the command can be issued on any switch. If the fabric is not in secure mode and this command is issued, the switch reboots. If the fabric is in secure mode and no FCS switches are present in the fabric, the command can be issued on any switch. This is used to recover a secure fabric that has no FCS switch. Note: Make sure that all users (using Fabric OS CLI or Web Tools) are logged off the fabric before enabling security mode. All users who are logged into the fabric on non-FCS switches when this command executes have their telnet sessions terminated. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Operands This command has the following operand: fcsmember Specify a list of FCS switches. The list of member switches must be enclosed in quotation marks and each member switch must be separated by semicolons. The members can be specified using Domain, WWN, or switch name format. For example: "5; 10:00:00:60:69:00:00:20; star1" If a member is specified by Domain, or switch name, the switch must be in the fabric or the command fails. This operand is optional. If no operand is specified the session becomes interactive and you are prompted to enter FCS member values. 692 Fabric OS Version 3.1.x/4.1.x Reference Guide