HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 136

Fabric OS Commands Operands ■ If a good checksum test, check that: - CMI error bit is not set. - CMI error interrupt status bit is not set. ■ if a bad checksum test, check that: - CMI error bit is set. - CMI error interrupt status bit is set. 5. Check that all other ASICs (~Y) do not have its: ■ Capture flag set. ■ CMI error bit set. ■ CMI error interrupt status bit set. This command has the following operands: passcnt (V3.1.x only) --slot number (V4.1.x only) -passcnt count (V4.1.x only) -txports list (V4.1.x only) -rxports list (V4.1.x only) -skip mask (V4.1.x only) Specify the number of times to perform this test. The default value is 1. This operand is optional. Specify the slot number to test. The default is set to 0 and designed to operate on fixed port count products. Specify the number of test passes to run. By default the test will be run one time. Specify a list of ports to transmit data. By default all the ports in the specified slot (--slot number) will be used. See itemlist help pages for further details. This operand is optional. Specify a list of ports to receive data. By default all the ports in the specified slot (--slot number) will be used. See itemlist help pages for further details.This operand is optional. Specify the particular test by using the following bit weight data: 1 CMI data test (ignore checksum) 2 CMI checksum test 3 Enable all tests This operand is optional. 136 Fabric OS Version 3.1.x/4.1.x Reference Guide