HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 151

configure The configure command is navigated using a series of menus. Top level menus and associated submenus consist of a text prompt, a list of acceptable values, and a default value (in brackets). Use the following options to control input: Return Interrupt (Ctrl-C) End-of-file (Ctrl-D) When entered at a prompt with no preceding input, accepts the default value (if applicable) and moves to the next prompt. Aborts the command immediately and ignores all changes made. This keystroke is common on many computers, but can be different on your system. When entered at a prompt with no preceding input, terminates the command and saves changes made. This keystroke is common on many computers, but may be different on your system. Fabric Parameters There are a number of settings which control the overall behavior and operation of the Fabric. Some of these values, such as the domain, are assigned automatically by the Fabric and may differ from one switch to another in the fabric. Other parameters, such as the BB credit, can be changed for specific applications or operating environments, but must be in agreement among all switches to allow formation of the fabric. The Fabric parameters are as follows: Table 2: Configure Command Fabric Parameters Domain BB Credit Field R_A_TOV E_D_TOV Data Field Size Sequence Level Switching Disable Device Probing Suppress Class F Traffic Sync IO Mode (V3.1.x only) Default 1 16 10000 2000 2112 0 0 0 0 Range 1..239 V3.1.x = 1 to 27 V4.1.x = 1 to 16 4000..120000 1000 to 5000 256 to 2112 0 or 1 0 or 1 0 or 1 0 or 1 Fabric OS Version 3.1.x/4.1.x Reference Guide 151