HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 755

setSplbMode The connections between pairs of M->M ports will be chosen to exercise the connections between as many chips (or bloom quadrants) as possible subject to the setting of allow_intra_chip and the availability of pairs of M->M ports. Any ports that are cross-cabled will be routed to each other in the normal manner regardless of the setting of SPLB mode: P1 TX >>> P2 RX -> P1 TX P2 TX >>> P1 RX -> P2 TX Operands This command has the following operands: mode -show (V4.1.x only) Specify 1 to enable SPLB mode or 0 to disable SPLB mode. For V3.1.x, the default (if no operand specified) is 0, SPLB disabled. For V4.1.x, if no mode is specified the current value is displayed. This operand is optional. Specify the -show operand to display the current setting. This operand is optional. Example To enable or disable a two port loopback: switch:admin> setsplbmode 1 Committing configuration...done. SPLB mode is now ON. switch:admin> setsplbmode 0 Committing configuration...done. SPLB mode is now OFF. switch:admin> See Also setgbicmode setSfpMode spinSilk Fabric OS Version 3.1.x/4.1.x Reference Guide 755