HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 147

configUpload configUpload Create a backup file of switch configuration information on a host workstation. Synopsis configUpload ["host","user","file"[,"passwd"]] Availability Admin Release V3.1.x and V4.1.x Description Use this command to upload the switch configuration to a host file. The upload process uses FTP or RSHD. If the command is entered without operands, it becomes interactive and prompts the user for input. The configuration file is written as three sections. The first section contains the switch boot parameters. It has variables such as the switch's name and IP address. This section corresponds to the first few lines of output of the configShow command. The second section contains general switch configuration variables, such as diagnostic settings, fabric configuration settings, and SNMP settings. This section corresponds to the output of the configShow command (after the first few lines), although there are more lines uploaded than shown by the command. The third section contains the zoning configuration parameters. Note: V3.1.x supports FTP and RSHD protocol for configuration uploads. RSHD does not require the passwd operand. In V4.1.x, no spaces are allowed between operands. Fabric OS Version 3.1.x/4.1.x Reference Guide 147