HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 447

nbrStatsClear nbrStatsClear Reset FSPF interface counters. Synopsis: V3.1.x nbrStatsClear [portnumber] Synopsis: V4.1.x nbrStatsClear [slotnumber/][portnumber] Availability Admin Release V3.1.x and V4.1.x Description Use this command to reset the counters of FSPF frames transmitted and received on an interface. Use this command with no operand to reset counters on all interfaces. Operands This command has the following operand: slotnumber (V4.1.x only) portnumber Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is optional. Fabric OS Version 3.1.x/4.1.x Reference Guide 447