HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 407

linkCost Operands If no operands are specified, the command displays the actual cost of all the ISLs in the (logical) switch. Specify the [slotnumber/]portnumber operand to view the cost of that specific port. Specify [slotnumber/]portnumber and cost operands to set the cost of a specific ISL. Setting the cost to zero removes a static cost from the database and reverts the cost of the link to its default value. This command has the following operands: slotnumber (V4.1.x only) portnumber cost Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify the port to display or set the FSPF cost of a link. Valid values for port number vary depending on the switch type. This operand is optional. Specify the new cost of the link connected to the specified port number. This operand is optional. If no operands are specified, the current values for all ports on the (logical) switch are displayed. Fabric OS Version 3.1.x/4.1.x Reference Guide 407