HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 74

Fabric OS Commands Options Note: To run this command, you must disable the entire switch with the switchdisable command. Compared to bladediag, this is a limited test for single blade functionality, which does not involve backplane connections. This command has the following operands: [--slot] slotno -log logfile Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 10 slots. Slots number 5 and 6 are control processor cards, and slots 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify that the output of the command will be placed in a file named by the logfile argument. The log file will contain all activity that occurred during the execution of the command. All error messages are also saved in the logfile. If this option is not specified, no log file is created. 74 Fabric OS Version 3.1.x/4.1.x Reference Guide