HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 638

Fabric OS Commands Operands This command has the following operands: slotnumber portnumber [slot] -all Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Specify which slot to operate on. The entire ports in the slot will be displayed. If slot is not specified, the current slot will be assumed. This operand is optional. Example To display the port properties for slot 1 port 2: switch:admin> ptpropshow 1/2 Port Property for slot: 1, port: 2 P2: [be,3,2],SP,CAP:[1,1,1,(1,1,0)],WWN: 00:00:00:00:00:00:00:00 switch:admin> See Also chippropshow ptregshow 638 Fabric OS Version 3.1.x/4.1.x Reference Guide