HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 111

cfgSave cfgSave Save zone configuration to non-volatile memory. Synopsis cfgSave Availability Admin Release V3.1.x and V4.1.x Description Use this command to save the current zone configuration. The defined configuration and the name of the enabled configuration are written to non-volatile memory in all switches in the fabric. The saved configuration is automatically reloaded by the switch on power up and, if a configuration was in effect at the time it was saved, the same configuration is reinstalled with an automatic cfgEnable command. Because the saved configuration is reloaded at power on, only valid configurations are saved. The cfgSave command verifies that the enabled configuration is valid by performing the same tests as cfgEnable. If the tests fail, an error is displayed and the configuration is not saved. Tests may fail if a configuration has been modified since the last cfgEnable. This command ends and commits the current transaction. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message is displayed on the other switch notifying the transaction abort. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 111