HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 505

perfDelEEMonitor Operands This command has the following operands: slotnumber (V4.1.x only) portnumber monitorId Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Specify the monitor number you want to delete. Monitor numbers are defined when you create the monitor on a port. This operand is optional. When not specified, all monitors on the port are deleted. Example To delete an end-to-end monitor on blade 7 port 2: switch:admin> perfDelEEMonitor 7/2, 5 End-to-End monitor number 5 deleted switch:admin> switch:admin> perfdeleemonitor 2 This will remove ALL EE monitors on port 2, continue? (yes, y, no, n): [no] y switch:admin> See Also perfShowEEMonitor perfAddEEMonitor Fabric OS Version 3.1.x/4.1.x Reference Guide 505