HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 908

Fabric OS Commands for Licensed Products Secure Fabric OS Commands The following commands are available with the purchase of a Security license key. For more detailed information about trunking refer to the HP StorageWorks Secure Fabrics OS Version 1.0 User Guide. Table 24: Secure Fabric OS Commands Command secfabricshow secfcsfailover sechelp secmodeenable secmodedisable secmodeshow secnonfcspasswd secpolicyabort secpolicyactivate secpolicyadd secpolicycreate secpolicydelete secpolicydump secpolicyfcsmove secpolicyremove secpolicysave secpolicyshow secstatsreset secstatsshow sectemppasswdreset Description Displays security related fabric information. Enables a Backup FCS switch to take over as Primary FCS switch. Display information about security telnet commands. Enable security mode. Disable security mode. Display if security mode is enabled or disabled. Set the admin password for non-FCS switches. Aborts all changes to the defined database that have not been saved. Apply defined policy set to all switches in the fabric. Add members to an existing policy. Create a new policy. Delete an existing policy. Show all members of existing policies. Move a member in the FCS policy. Remove members from an existing policy. Save a defined security policy to flash memory on all switches in the fabric. Show an existing security policy. Reset security statistic for a policy or all policies to zero. Display security statistic for a policy or for all policies. Reset a password on a remote switch. 908 Fabric OS Version 3.1.x/4.1.x Reference Guide