HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 806

Fabric OS Commands switchCfgSpeed Configure all ports of the switch to a particular speed level. Synopsis switchCfgSpeed speed_level Availability Admin Release V3.1.x and V4.1.x Description Use this command to configure the speed of all the ports on a switch to a particular level. The configuration is saved in the non-volatile memory and persists across switch reboot or power cycle. The output of portShow displays achieved speed level and portCfgShow displays the user's desired speed setting. In the portShow output, the speed level is indicated as the current port speed of "1-Gbps" or "2-Gbps." In the portCfgShow output, the speed level is indicated as "1G," "2G," or "AN" (Auto-Negotiate). Operands This command has the following operand: speed_level Specify the speed of a port. This operand is required. Valid values are one of the following: 0: Auto-sensing mode. The port automatically configures for the highest speed. 1: 1-Gbps mode. The port will be at fixed speed of 1-Gbps. 2: 2-Gbps mode. The port will be at fixed speed of 2-Gbps. 806 Fabric OS Version 3.1.x/4.1.x Reference Guide