HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 544

Fabric OS Commands Operands This command has the following operands: slotnumber (V4.1.x only) portnumber distance (V3.1.x only) Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. This operand indicates the distance to the connected port. This operand is required. The valid values for this operand are: ■ L0: Deconfigure the port to be a regular switch port. This option supports up to 10-km links for 1 Gbps, or 5-km links for 2 Gbps. ■ LE: Level E mode is for E_Ports for distances beyond 5 km and up to 10 km especially for 2 Gbps link speeds. LE does not require extended fabric license. ■ L1: Level one long distance, up to 50 km. ■ L2: Level two long distance, up to 100 km. 544 Fabric OS Version 3.1.x/4.1.x Reference Guide