HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 739

sectemppasswdset sectemppasswdset Set a temporary password on a remote switch. Synopsis sectemppasswdset domain, login_name Availability Admin Release V3.1.x and V4.1.x Description Use this command to set a unique temporary password for a given account on a specific switch in the fabric. Use the sectemppasswdreset command to remove the temporary password or reboot the switch. You can change any password on any switch. In order to the change the password of an account which has higher level than that of the current user logged into the primary FCS switch, you must enter the password of the same level account on the primary FCS switch. The password setup on the target is not persistent and will be reset to the secure fabric-wide setting when this target switch is rebooted or when sectemppasswdreset is run on primary FCS switch. Each switch has four accounts; Root, Factory, Admin and User. Root and Factory accounts are disabled for non-FCS switches. This command can enable the Root or Factory account on a non-FCS switch when you specify a password for those accounts. The password should be at least 8 characters long and no more than 40 characters. Note: When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 739