HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 241

fabportshow Operands Flags nbrWWN red_ports Port flags: 0x00000001 slave connection 0x00000002 loop back connection 0x00000004 incompatible connection 0x00000008 overlapping domains 0x00000010 overlapping zones 0x00000020 done PTIO ioctl 0x00000040 sent a RJT to ELP 0x00000080 BF received from the port 0x00000200 segmented by routing code 0x00000800 zoning has completed 0x00001000 segmented by Platform Management 0x00002000 segmented due to no license 0x00004000 segmented due to E_Port disabling 0x00008000 DIA already sent for that port 0x00010000 RDI already sent 0x00020000 port is true T port 0x00040000 Port received an ELP 0x00080000 Port received an ELP RJT 0x00100000 LR Pending due to ELP RJT rcv 0x00200000 Received a DIA on this port 0x00400000 Port is the EMT Initiator 0x00800000 Security violation 0x01000000 Security incompatibility 0x02000000 Rcv a DIA ACC Neighboring switch's WWN All E-Ports that are connected to the same neighboring switch. This command has the following operands: slotnumber portnumber Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Fabric OS Version 3.1.x/4.1.x Reference Guide 241