HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 659

qlPartner qlPartner Set a QuickLoop partner or display information about a partner. Synopsis qlpartner [0|wwn] Availability Admin Release V3.1.x Description Use this command to set the QuickLoop to single/dual switch mode or to display the QuickLoop scope setting. If no argument is specified, this command displays the current QuickLoop mode, which can be single or dual switch. If in dual switch mode, the partner's WWN also displays. If 0 is used as argument, this command sets the QuickLoop to run in single switch mode, and restarts the switch if this causes a change in mode. If a non-zero and valid WWN (a WWN that is part of the fabric) for a switch is specified, that switch becomes the QuickLoop partner. The switch is then restarted to run in dual switch mode. The partner setting is updated in non-volatile memory. Note: If Advanced Zoning is in use the qlDisable, qlEnable, and qlPartner commands are not in effect. In this case, dual switch QuickLoops can be managed using the telnet commands available through Advanced Zoning. This command requires an Advanced Zoning license. Fabric OS Version 3.1.x/4.1.x Reference Guide 659