HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 414

Fabric OS Commands payload_pattern (V3.1.x only) pattern_width (V3.1.x only) --slot number (V4.1.x only) -nframes count (V4.1.x only) -ports itemlist (V4.1.x only) -seed payload_pattern (V4.1.x only) -width pattern_width (V4.1.x only) Specify the pattern of the test packets payload. Specify the width of the pattern which user specified. Valid values are: 1 = byte 2 = word 4 = quad Specify the slot number in a StorageWorks Core switch. The slot number must be followed by a slash ( / ) and the port number. The StorageWorks Core switch has a total of 10 slots counted from 1 to 10. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are switch cards. On each switch card, there are 16 ports counted from the bottom, 0 to 15. A particular port must be represented by both slot number (1 through 4 or 7 through 10) and port number (0 through 15). This operand is not required for switches that do not have slots. Specify the number of times (or number of frames per port) to execute this test. The default value is 10. Specify a list of user ports to test. By default all the user ports in the current slot are tested. Refer to itemlist for more information on selecting ports. Specify the seed pattern of the test packets. Specify the width of the test pattern. Valid values include: 1 for byte 2 for word 3 for quad This operand is optional. 414 Fabric OS Version 3.1.x/4.1.x Reference Guide