Lenovo ThinkServer RD330 MegaRAID SAS Software User Guide - Page 200

Chapter 5: MegaRAID Command Tool | Virtual Drive-Related Options MegaRAID SAS Software User Guide 5.14.4 Manage Virtual Drives Initialization Use the command in the following table to manage initialization of the virtual drive(s) on the selected controller(s). Table 75: Manage Virtual Drive Initialization Convention Description MegaCli -LDInit {-Start [Fast | Full]} |-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL Allows you to select the following actions for virtual drive initialization: -Start: Starts the initialization (writing 0s) on the virtual drive(s) and displays the progress (this is optional). The fast initialization option initializes the first and last 8 Mbyte areas on the virtual drive. The full option allows you to initialize the entire virtual drive. -Abort: Aborts the ongoing initialization on the virtual drive(s). -ShowProg: Displays the snapshot of the ongoing initialization, if any. -ProgDsply: Displays the progress of the ongoing initialization. The routine continues to display the progress until at least one initialization is completed or a key is pressed. 5.14.5 Manage a Consistency Check Use the command in the following table to manage a data consistency check (CC) on the virtual drives for the selected controller(s). Table 76: Manage Consistency Check Convention Description MegaCli -LDCC -Start|-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL Allows you to select the following actions for a data CC: -Start: Starts a CC on the virtual drive(s), then displays the progress (optional) and time remaining. -Abort: Aborts an ongoing CC on the virtual drive(s). -ShowProg: Displays a snapshot of an ongoing CC. -ProgDsply: Displays ongoing CC progress. The progress displays until at least one CC is completed or a key is pressed. Page 200