Lenovo ThinkServer RD330 MegaRAID SAS Software User Guide - Page 276

Chapter 8: Configuration | Changing Adjustable Task Rates MegaRAID SAS Software User Guide 8.4 Changing Adjustable Task Rates Follow these steps if you need to change the adjustable rates for rebuilds, and other system tasks that run in the background: NOTE: We recommend that you leave the adjustable task rates at their default settings to achieve the best system performance. If you raise the task rates above the defaults, foreground tasks will run more slowly and it might seem that the system is not responding. If you lower the task rates below the defaults, rebuilds and other background tasks might run very slowly and might not complete within a reasonable time. If you decide to change the values, record the original default value here so you can restore them later, if necessary: Rebuild Rate Background Initialization (BGI) Rate Check Consistency Rate 1. Select a controller icon in the Physical tab or the Logical tab in the left panel of the MegaRAID Storage Manager window. 2. Select Go To>Controller>Set Adjustable Task Rates from the menu bar, as shown in Figure 155. Page 276 Figure 155: Set Adjustable Task Rates Menu The Set Adjustable Task Rates screen appears, as shown in Figure 156.