Ricoh Aficio MP C4502 General Settings Guide - Page 14
Connecting to the Ethernet Interface - power switch
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting the Machine Connecting to the Ethernet Interface This section describes how to connect 10BASE-T or 100BASE-TX cable to the Eth- 1 ernet interface. Important ❒ If the main power switch is on, turn it off. A Attach the supplied ferrite core to the end of the Ethernet cable. AJL014S B Make sure the main power switch of the machine is off. C Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. AJL019S D Connect the other end of the Ethernet cable to a network connection device such as a hub. 6
Connecting the Machine
6
1
Connecting to the Ethernet Interface
This section describes how to connect 10BASE-T or 100BASE-TX cable to the Eth-
ernet interface.
Important
❒
If the main power switch is on, turn it off.
A
Attach the supplied ferrite core to the end of the Ethernet cable.
B
Make sure the main power switch of the machine is off.
C
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
D
Connect the other end of the Ethernet cable to a network connection device
such as a hub.
AJL014S
AJL019S