Ricoh Aficio MP C4502 General Settings Guide - Page 260

Registering Addresses and Users for Facsimile/Scanner Functions Registering the Transfer Request This section describes how to register the Transfer Station and Receiving Station used in the fax function's Transfer Request. Before you can use Transfer Request, you must program the Polling ID and set the Transfer Report. See "Polling Transmission"and "Transfer Request", Facsimile Reference. Important ❒ When messages are transferred by fax, Transfer Stations must be machines of the same manufacturer as this one, and have the Transfer Station function. ❒ When messages are transferred by e-mail, Transfer Stations must be machines of the same manufacturer as this one, and have both the Transfer Station and Internet Fax functions. ❒ You cannot use Transfer Request without programming the fax number or email address of the Requesting Party in the Address Book of the Transfer Stations. ❖ Transfer Station Refers to the machine that receives the Transfer Request to forward incoming messages to another destination. 7 ❖ Receiving Station Refers to the facsimile or computer that receives messages from the Transfer Station. Note ❒ Polling IDs of the Requesting Party (this machine) and Transfer Stations must be identical. ❒ You can have up to 30 Receiving Stations per Transfer Station. If you specify a Transfer Station Group, the group counts as a single receiver. Reference "Polling Transmission", Facsimile Reference "Transfer Request", Facsimile Reference 252