Ricoh Aficio MP C4502 General Settings Guide - Page 190
Wait Time for Next Orig.: Exposure Glass
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Scanner Features ❖ Wait Time for Next Orig.: Exposure Glass To divide originals and scanning them individually with the exposure glass to form a single file, select [Off], [Set Wait Time], or [Continuous Wait] for the wait- ing status. The default setting is Set Wait Time. The default setting time is 60 sec.. If you select [SADF] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next Orig.: Exposure Glass] setting becomes invalid. If you select [Batch] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next Orig.: Exposure Glass] setting becomes invalid, and the ma- chine waits for an additional original to be placed. If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals with the number keys. Scanning will start if additional originals are placed and the {Start} key is pressed within this time. You can end scanning and begin transmission by pressing the {q} key within this time. Once the specified time has elapsed, transmission starts automatically. If [Continuous Wait] is selected, the machine will wait for additional originals until the {q} key is pressed. Scanning will start when additional originals are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {q} key. 6 If originals are placed in the ADF (automatic document feeder), transmission will start without waiting for additional originals after all originals in the ADF have been scanned, regardless of the specified settings. If a paper misfeed occurs or any of the following operations are performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {q} key is pressed. • Changing the settings such as the scan settings • Opening the upper cover of the ADF • Pressing the {Interrupt} key to activate the copy mode 182