Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 104

Command Description Modea deny | permit (IP ACL) The deny command denies traffic if the ML conditions defined in the deny statement are matched. The permit command allows traffic if the conditions defined in the permit statement are matched. deny | permit (Mac-Access- The deny command denies traffic if the ML List-Configuration) conditions defined in the deny statement are matched. The permit command allows traffic if the conditions defined in the permit statement are matched. ip access-group Attaches a specified access-control list to an GC or interface. IC mac access-group Attaches a specific MAC Access Control List (ACL) to an interface in the in-bound direction. GC or IC mac access-list extended Creates the MAC Access Control List (ACL) GC identified by the name parameter. mac access-list extended Renames the existing MAC Access Control List GC rename (ACL) name. remark Adds a comment to an ACL rule. IPAF4, IPAF, ML, ARPA service-acl input Blocks Link Local Protocol Filtering (LLPF) IC protocol(s) on a given port. show access-lists interface Displays interface ACLs. PE show service-acl interface Displays the status of LLPF rules configured on PE a particular port or on all the ports. show ip access-lists Displays an Access Control List (ACL) and all PE of the rules that are defined for the ACL. show mac access-lists Displays a MAC access list and all of the rules PE that are defined for the ACL. a. For the meaning of each Mode abbreviation, see Mode Types. Dell EMC Networking CLI 104