Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 2187

bits with no intervening spaces, or the IP address may be followed by an IPv4 mask in dotted quad notation. The range of IPv4 significant bits is 1 to 31 bits. Default Configuration No community group is defined. Command Mode Global Configuration mode User Guidelines The group-name parameter can be used to restrict the access rights of a community string. When it is specified, the software: • Generates an internal security-name. • Maps the internal security-name for SNMPv1 and SNMPv2 security models to the group-name. The community name may include any printable characters except a question mark, a backslash, or an at sign. Enclose the string in double quotes to include spaces within the name. The surrounding quotes are not used as part of the name. The CLI does not filter illegal characters and may accept entries up to the first illegal character, or reject the entry entirely. Example The following example maps a community access string dell_community to group dell_group and restricts access to host 192.168.29.1. console(config)# snmp-server community-group dell_community dell_group ipaddress 192.168.29.1 snmp-server contact Use the snmp-server contact command in Global Configuration mode to set up a system contact (sysContact) string. To remove the system contact information, use the no form of the command. Syntax snmp-server contact text Switch Management Commands 2187