Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 1757

User Guidelines The VRF identified in the parameter must have been previously created or an error is returned. The VRF parameter is only available on the N3000-ON/N3100-ON/N3200ON series switches. The clear ip ospf counters command does not clear the message queue high water marks. The following is output. Parameter Description OSPFv2 Packet Statistics The number of packets of each type sent and received since OSPF counters were last cleared. LSAs Retransmitted The number of LSAs retransmitted by this router since OSPF counters were last cleared. LS Update Max Receive Rate The maximum rate of LS Update packets received during any 5-second interval since OSPF counters were last cleared. The rate is in packets per second. LS Update Max Send Rate The maximum rate of LS Update packets transmitted during any 5-second interval since OSPF counters were last cleared. The rate is in packets per second. Number of LSAs Received The number of LSAs of each type received since OSPF counters were last cleared. OSPFv2 Queue Statistics For each OSPFv2 message queue, the current count, the high water mark, the number of packets that failed to be enqueued, and the queue limit. The high water marks are not cleared when OSPF counters are cleared. Example console# show ip ospf traffic Time Since Counters Cleared: 4000 seconds OSPFv2 Packet Statistics Recd: Sent: Hello 500 400 Database Desc 10 8 LS Request 20 16 LS Update 50 40 LS ACK 20 16 Total 600 480 Layer 3 Routing Commands 1757