Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 132

Command Description traffic-shape vlan priority Specifies the maximum transmission bandwidth limit for the interface as a whole. Assigns a default VLAN priority tag for untagged frames ingressing an interface. a. For the meaning of each Mode abbreviation, see Mode Types. Modea GC or IC IC Spanning Tree Command Description Modea clear spanning-tree detected-protocols Restarts the protocol migration process on all PE interfaces or on the specified interface. exit (mst) Exits the MST configuration mode and applies MC configuration changes. instance (mst) Maps VLANs to an MST instance. MC name (MST) Defines the MST configuration name. MC revision (mst) Defines the configuration revision number. MC show spanning-tree Displays spanning tree configuration. PE show spanning-tree summary Displays spanning tree settings and parameters PE for the switch. show spanning-tree vlan Displays spanning tree information per VLAN PE and also lists the port roles and states as well as the port cost. spanning-tree Enables spanning-tree functionality. GC spanning-tree auto-portfast Sets the port to auto portfast mode. IC spanning-tree backbonefast Enables the detection of indirect link failures GC and accelerate spanning tree convergence on STP-PV/RSTP-PV configured switches using Indirect Link Rapid Convergence (IRC). spanning-tree bpdu flooding Allows flooding of BPDUs received on GC nonspanning-tree ports to all other non- spanning-tree ports. spanning-tree bpdu- Enables BPDU protection on a switch. GC protection Dell EMC Networking CLI 132