Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.6 - Page 2306

Unit Plugged-in Model Identifier Switch Status Switch Description Detected Code Version Detected Code in Flash SFS Last Attempt Status Serial Number Up Time Description This field displays the model identifier for this switch. Model Identifier is a 32-character field assigned by Dell to identify the switch. If no physical unit is present for the unit number, this field is empty. This field displays the switch status. Possible values are OK, Unsupported, Code Mismatch, Config Mismatch, SDM Mismatch Not Present, Updating Code, or STM Mismatch This field displays the switch description. This field displays the version of code running on this switch. If the switch is not present and the data is from preconfiguration, the code version is "None." This field displays the version of code that is currently stored in FLASH memory on the switch. This code will execute after the switch is reset. If the switch is not present and the data is from preconfiguration, then the code version is "None." This field displays the Stack Firmware Synchronization status. The possible values are: Success, Failure, Min bootcode version not present, None. This field displays the Switch serial number. This field displays the system up time. The additional fields in the all units example are as follows: Unit Switch Management Status Description This field displays the unit identifier assigned to the switch. This field indicates whether the switch is the Management Switch, a stack member, or the status is unassigned. Switch Management Commands 2306